Leica CV5030 Instructions For Use Manual page 37

1
Fig. 26
Coverslip magazine
2
Fig. 27
Fig. 28
Leica CV5030
2
1
1
2
Instrument Setup
Coverslip magazine
• Select and fill a cover slip magazine
(→ Fig. 27-2) for the desired cover slip type (22
or 24 mm width).
• Tap the cover slip magazine on the edge that
points toward the front of the instrument after
insertion (this ensures that all of the cover
slips are positioned correctly). Then insert
the cover slip magazine into the cover slip
magazine holder by this edge and then allow
the magazine to lock in place on the leaf spring
(→ Fig. 27-1).
Output magazine
• Fill the output station
the desired number of output magazines
(→ Fig. 28-1). Up to two size 30 output
magazines or three size 20 output magazines fit
in the output station.
• Operating the instrument requires that at least
one output magazine is inserted.
(→ Fig. 28-2) with
4
37