Removing Or Installing The Transport Anchors - Leica CV5030 Instructions For Use Manual

7. Connect the power supply.
8. Use the following accessories:
A. Mountant bottle
B. Cover slip catch tray
C. Cover slip magazine
D. Output magazine
E. Loading bath
F. Dispenser needle cleaner
G. Glass vial for dispenser rest position
H. Refill consumables

4.3.1 Removing or installing the transport anchors

1. Open the service door
(→ Fig. 6-2).
Fig. 6
2. Remove the transport anchor
3. Remove the transport anchor
in the process.
4. Using the provided No. 3 Allen key, unscrew the screws
two red transport anchors
Leica CV5030
(→ Fig. 6-1) on the left side of the instrument and remove the foam
1
(→ Fig. 7-3)
(→ Fig. 7-4)
(→ Fig. 7-3)
for the Pick & Place module.
for the gripper. The gripper slowly moves downward
(→ Fig. 7-1)
and (→ Fig. 7-4):
Instrument Setup
2
and (→ Fig. 7-2) for the
4
23