Leica CV5030 Instructions For Use Manual page 60

5
Operation
Example:
1. To modify the length of the coverslip mountant stroke (STK), press the RELEASE COVERSLIP
button (→ Fig. 40).
2. The name of the parameter and its currently set value appear on the display (→ Fig. 40-1). The
selected program
3. The START or PAUSE buttons can be used to increase or decrease the value of the parameter
respectively. Press RESPOND as confirmation. The procedure for changing a value is identical
for all parameters.
Fig. 40
Mountant Stroke — stroke length of the coverslip mountant
The quantity and stroke length of the coverslip mountant is adapted to the cover slip length.
60
(SET 1 through SET 4) is shown in the top right.
1 x
1
Version 3.4, Revision M