Leica CV5030 Instructions For Use Manual page 21

Fig. 3
Removing the instrument
1. Unscrew the 8 screws
remove the wooden box
2. Unscrew 2 x 8 screws (front and rear on the instrument, (→ Fig. 4-1), loosen and remove the
retaining clips
3. Remove the dust cover from the instrument. For setting up the instrument, refer to
4.2.1 Setting up the Leica
Fig. 4
Leica CV5030
(→ Fig. 2-3) on the bottom of the wooden box on the exterior. Carefully
(→ Fig. 2-5) from the baseplate.
(→ Fig. 4-2) from the baseplate.
CV5030).
2
1
Instrument Setup
(→ p. 22 –
4
21