Leica CV5030 Instructions For Use Manual page 64

5
Operation
Speaker Volume Level — volume of the audible signal
Setting for the volume of key tones, messages and the signal tone:
In increments of 1 from
Note
The signal tone and audible signals of the buttons cannot be disabled completely.
Coverslip Limit Adjustment — setting for the cover slip limit
The setting of the LIM (cover slip limit setting) parameter defines what quantity of cover slips remaining
in the coverslip magazine is used to display the
user of a critical (low) number of cover slips remaining in the magazine.
The setting is made as follows:
1. Place a cover slip stack (approx. 30 - 40 pieces) in the empty coverslip magazine.
2. Then, press the START button.
3. The Pick & Place module moves to the cover slip magazine and lowers itself down to the top
cover slip. Then it returns to its original position.
4. The setting for the new cover slip limit has now been saved and the overview for the parameter
setting in
64
1 (quiet) to
MENU B reappears on the display.
3 (loud)
COVERSLIPS LOW notice on the display. This notifies the
Version 3.4, Revision M