Description Of The Required Daily Cleaning Measures; Loading Chute And Bath Transport With Transport Chain; Dispenser Needle Cleaner (Nozzle Cleaner); Glass Vial In The Dispenser Rest Position - Leica CV5030 Instructions For Use Manual

Robotic cover slipper
Hide thumbs Also See for CV5030:
Table of Contents

Advertisement

7
Cleaning and Maintenance
7.5
Description of the required daily cleaning measures

7.5.1 Loading chute and bath transport with transport chain

• Check the loading chute and bath transport with transport chain for broken glass and adhesive residue
and carefully remove any dirt or debris.
Warning
There is a danger of cutting injuries during this cleaning step. Therefore, proceed with the necessary
caution.
• Wear protective clothing!
• To clean adhesive residue, use a lint-free cloth soaked in compatible solvent. Loose glass shards and
splinters can be cleaned up using a commercially available vacuum cleaner.

7.5.2 Dispenser needle cleaner (nozzle cleaner)

• Fill the dispenser needle cleaner with approx. 5 ml of solvent.
• Check the brush. If the brush is hard or very dirty, replace it with a new brush.

7.5.3 Glass vial in the dispenser rest position

• Check the level, empty if necessary and add a compatible solvent.

7.5.4 Loading Bath

• Fill the loading bath with a sufficient amount of solvent.

7.5.5 Dispenser needles

• Before starting up the instrument and before the priming cycle, check the dispenser needles for proper
flow and adhesive residue. Check the dispenser needles to ensure that they are securely in place and
not bent
(→ p. 26 – 4.6 Installing the dispenser

7.5.6 Cover slip catch tray

• Remove glass residue from the cover slip catch tray. Ensure that the cover slip catch tray is securely in
place
(→ p. 36 – 4.10 Installing the
Warning
Notice: If the cover slip catch tray is not correctly in place, collisions may result.

7.5.7 Cover slip magazine

• Check that the coverslip magazine is correctly seated. Refilling the cover slips can result in broken
glass in or below the coverslip magazine, which must be removed.
84
group).
accessories).
Version 3.4, Revision M

Advertisement

Table of Contents
loading

Table of Contents