Leica CV5030 Instructions For Use Manual page 34

4
Instrument Setup
4. Insert the completely assembled dispenser needle cleaner
shown in (→ Fig. 22). Press down to ensure that the two lateral mounting clips
audibly engage in the notches of the bracket.
Fig. 22
Alignment to the dispenser needle
1. After the dispenser needle cleaner is installed, it must be aligned relative to the dispenser
needle (→ Fig. 23-3).
2. To do so, unscrew the screw
align the dispenser needle cleaner by moving the bracket
dispenser needle
(→ Fig. 23).
2
1
Fig. 23
34
2 1
3
(→ Fig. 23-2)
(→ Fig. 23-3) move into the correct position in the middle of the cleaning port
3
(→ Fig. 22-4)
6
using the No. 3 Allen key
(→ Fig. 23-1)
into the holder as
(→ Fig. 22-6)
5
4
(→ Fig. 22-5) and
sideways until the
Version 3.4, Revision M