5.2 Functions of the software
The functions of the individual user interfaces are described in this section.
The technician's user interface is not included, since a password is
required for access. The technician's user interface is described in the
Service Instructions.
5.2.1 Start screen
When you switch on the machine ( p. 23), the start screen appears.
On this user interface you can:
Fig. 51: Start screen
(1) - Display of date and time
(2) - Referencing the machine
66
• Reference the machine (diagnostic run for reading the code of the
transfer plate and finding the initial position) and, in this way,
access the pocket mode selection window
• Access the technician's user interface by entering a password
• Exit the operating software or shut down the operating terminal
( p. 61).
①
②
③
(3) - Technician's user interface
(with password)
(4) - Exit the operating software or terminal
shut down
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
Programming
④