Deactivating EMERGENCY STOP in transfer frame
To deactivate the EMERGENCY STOP in the transfer frame:
1. Correct any disturbance or danger that may be present.
2. Pull the left side of the transfer frame to the left until it latches into the
The control for the machine starts up and clicks once.
Air is applied to the moving parts. The safe stop light lights up.
The EMERGENCY STOP message is still displayed on the operating
3. Press the Confirm button
The Start screen is displayed on the operating terminal. The machine
4. Repeat the settings on user interface 1 and user interface 2 that were
Start a new sewing cycle ( p. 55).
54
initial position with an audible click.
terminal.
remains in the Safe stop mode.
deleted by the EMERGENCY STOP.
to acknowledge the message.
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
Operation