3. Press button 2 (6).
The middle slide (2) is raised.
1. Press button 1 (4).
The flap clamp moves to the right to the loading position.
Fig. 45: Sewing (806N-521) (3)
(7) - Flap clamp
2. Position the flap (8) in the flap clamp (7) and align it.
3. Press button 1 (4).
The flap clamp (7) closes.
4. Press button 1 (4).
The flap clamp (7) moves to the left, the folding device moves to the
The edge folding process starts.
5. Press button 1 (4).
The sewing material isfed to the sewing unit, sewn, and deposited on
If the transfer of the sewing material to the sewing unit expires, then a new
sewing cycle can commence.
A light signaling the machine's readiness for use is not available. If the ma-
chine is not yet ready, nothing will happen after a press on button 1 (4).
Information
A laser positioning aid for the 806N is available as additional equipment.
It facilitates exact alignment on the sewing material support surface when
the basic part is being applied.
60
⑦
front.
the stacker using the outfeed roller.
⑧
⑦
(8) - Flap
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
Operation
⑧