Operation
4.12.1 Removing the shaping assembly
Removing the edge folding frame
Fig. 28: Removing the edge folding frame
(1) - Pin
(2) - Hose connecting piece
(3) - Coupling strip
To remove the edge folding frame:
1. Pull off the hose from the hose connecting piece (2) in an upwards
2. Unscrew the screw handle (4) to the left until the coupling strip (3) can
3. Lift the coupling strip (3) off the edge folding frame.
4. Raise the carriage (5) on the rear right and left side.
The pins (1) on the edge folding frame are exposed.
5. Pull out the edge folding frame towards the front.
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
①
②
direction.
be released from the edge folding frame.
(4) - Screw handle
(5) - Carriage
⑤
④
①
③
43