Enabling Bundle Removal - Dürkopp Adler 806N-111 Operating Instructions Manual

Programming
Exiting the selection window:
To exit the selection window:
1. Press the Exit button again to exit the selection window.
 The selection window closes, and you are returned to the Bobbin
menu screen.
Adopting the input value
To adopt the entered value:
1. Press the Stitch counter button (2) .
 The stitch counter adopts the entered stitch value.
2. Press the Exit button to exit the Bobbin menu screen.
 You are returned to user interface 1.

5.5.4 Enabling bundle removal

You must enable the bundle removal when you want to remove the sewn
parts. The stacker opens and allows the parts to be removed.
To enable bundle removal:
1. Press the Enable bundle removal button .
 The button is highlighted in green.
 The stacker bar opens.
2. Remove the finished products.
3. Press the Enable bundle removal button again.
 The stacker bar closes.
 The button is no longer highlighted in green.
82 Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020