DA 10 can be obtained from DÜRKOPP ADLER sales offices using the
following part number:
Container
250 ml
1 l
2 l
5 l
Fig. 76: Lubricating (806N-111)
(1) - Oil filling neck
(2) - Inspection glass
Checking the oil level
To check the oil level:
1. Check the oil level at the inspection glass (3).
The oil level must be between the middle and the upper edge of the
2. Check the oil supply at the inspection glass (2) with the motor running.
An air bubble is visible in the inspection glass.
Topping up with oil
To top up with oil:
1. Top up oil through the oil filling neck (1).
The inspection glass (3) must indicate that it is 3/4 full with oil.
100
Part number
9047 000011
9047 000012
9047 000013
9047 000014
inspection glass (3).
①
②
③
(3) - Inspection glass
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
Maintenance