Dürkopp Adler 806N-111 Operating Instructions Manual page 61

Operation
Fig. 43: Sewing (806N-521) (1)
(1) - Basic part
(2) - Middle slide
2. Place the basic part onto the sewing material support surface (6) and
3. Press button 1 (4).
 The air suction is switched on, the basic part is fixed into place.
 The middle slide (2) advances.
Fig. 44: Sewing (806N-521) (2)
(2) - Middle slide
(4) - Button 1
4. Place the pocket blank (5) onto the middle slide (2) and align it.
OPTIONAL:
To align the pocket blank:
1. Press button 2 (6).
 The middle slide (2) is lowered.
2. Align the material according to the sample.
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
①
align it.
④
② ③ ②
(3) - Sewing material support surface
②
⑤ ⑥ ④ ⑤
(5) - Pocket blank
(6) - Button 2
①
⑥
59