Maintaining The Pneumatic System; Setting The Operating Pressure - Dürkopp Adler 806N-111 Operating Instructions Manual

Maintenance

6.4 Maintaining the pneumatic system

6.4.1 Setting the operating pressure

Proper setting
Refer to the Technical data ( p. 135) chapter for the permissible oper-
ating pressure. The operating pressure cannot deviate by more than
± 0.5 bar.
Check the operating pressure on a daily basis.
Fig. 77: Setting the operating pressure
(1) - Pressure controller
(2) - Pressure gage transfer plate
(3) - Pressure gage vacuum
To set the operating pressure:
1. Turn the shut-off valve (7) into the horizontal position.
2. Pull the pressure controller operating pressure (6) down.
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
NOTICE
Property damage from incorrect setting!
Incorrect operating pressure can result in damage to the machine.
Ensure that the machine is only used when the operating pressure
is set correctly.
①
②
③
④
⑤
(output y 134)
(output y 133)
⑥
(4) - Pressure controller
(5) - Pressure gage
(6) - Pressure controller operating pressure
(7) - Shut-off valve
⑦
101