Operation
Fig. 12: Threading the needle thread (806N-121) (2)
(1) - Thread lever
(2) - Guide
(3) - Needle thread monitor
(4) - Guide
(5) - Guide
(6) - Needle eye
4. Insert the thread from the right to the left through the rear part of the
5. Insert the thread from the right to the left through the front part of the
6. Feed the thread in a wavelike manner from the top through the
7. Guide the thread counterclockwise around the pre-tensioner (10).
8. Guide the thread clockwise around the main tensioner (8).
9. Feed the thread under the guide (7).
10. Insert the thread through the guide (2).
11. Feed the thread through the thread regulator (9).
12. Feed the thread through the thread lever (1).
13. Insert the thread through the guide (2).
14. Feed the thread through the needle thread monitor (3).
15. Insert the thread through the guide (4).
16. Feed the thread through the guide (5) on the needle bar.
17. Feed the thread through the needle eye (6) from left to right.
18. Pull the thread approx. 5 cm further.
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
①
②
③
④
⑤
⑥
guide (12).
guide (12).
guide (11).
(7) - Guide
(8) - Main tensioner
(9) - Thread regulator
(10) - Pre-tensioner
(11) - Guide
(12) - Guide
⑫
⑪
⑩
⑨
⑧
⑦
27