To clean the machine:
1. Shut down the operating terminal ( p. 61).
2. Switch off the main switch.
3. Do not close the compressed air shut-off valve because compressed
4. Use the compressed air gun to blow off sewing dust and thread rem-
Points that need to be cleaned particularly thoroughly:
5. Clean the oil pan with a cloth.
96
NOTICE
Property damage may occur!
Blowing remnants of fabric and thread under the covers can damage
or destroy the machine motors.
NEVER blow remnants of fabric and thread under the covers, but
rather forwards or to the side.
NOTICE
Property damage may occur!
If the throat plate is not lifted carefully the equipotential bonding
connected to the plate can be damaged or ripped off.
ALWAYS lift the throat plate carefully.
Pay attention to the equipotential bonding when lifting.
air for cleaning will then no longer be available.
nants forwards or to the side.
• Sewing material support surface
• Bobbin area
• Hook and surrounding area
• Thread cutter
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
Maintenance