Programming
Setting options on user interface 2
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
Button
Working step-by-step, p. 86
The machine advances only step by step, which is useful for
sewing-in operations or a test run.
Activating Sewing without edge folding, p. 87
To test if the sewing head settings are correct.
Switching the stroke position on/off, p. 87
The stroke position is the clearance between the sewing foot
and the sewing material support surface.
Activating needle cooling, p. 88
Cools the needle, which is heated by the friction on the fabric.
Standard equipment, which can be enhanced.
Activating the needle thread monitor, p. 88
The needle thread monitor notices when the needle thread
tears and issues a corresponding error message.
Activating automatic air suction, p. 89
Additional equipment; air suction is automatically activated
by a light barrier.
Select/deselect stacker variant 1, p. 90
Selection of one of the two stacking variants.
Select/deselect stacker variant 2, p. 90
Selection of one of the two stacking variants.
Setting the outfeed roller path, p. 91
Distance the fabric is to be rolled out of the sewing area
before it is ejected.
Activating the advance roller, p. 93
Additional equipment, required for very short seam material,
e. g. shorts.
Function
71