Fig. 9: Switching on the machine (2)
(1) - Rotary switch
(2) - ON
2. Turn the main switch from the 0 position (1) to the right into
The control for the machine starts up and clicks once.
The operating terminal does not need to be switched on separately - it is
activated through the power supply.
4.3 Changing the needle
24
①
the I position (2).
Air flows in audibly.
The safe stop light lights up.
The operating terminal starts up, and the Start screen appears.
CAUTION
Risk of injury from sharp parts!
Puncture or cutting.
ONLY work on the machine if the safe stop light is
lit up.
NEVER reach into the area of the middle slide, the
needle or other sharp or sharp-edged parts.
(3) - OFF
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
Operation
③
②