Winding The Hook Thread (806N-111) - Dürkopp Adler 806N-111 Operating Instructions Manual

Operation
7. Feed the thread from bottom to top through the hole in the middle of
8. Feed the thread from top to bottom through the left hole of the guide (6).
9. Wind the thread several times clockwise around the bobbin.
 The thread is fastened to the bobbin.
10. Press the winder lever (3) against the bobbin.
11. Sew with the selected seam pattern.
 The bobbin thread is wound on.
 Winding is automatically stopped by the winder lever (3) when the
12. When the bobbin is full, cut the thread using the cutting clamp (4) and

4.7 Winding the hook thread (806N-111)

Fig. 17: Winding the bobbin thread (806N-111) (1)
(1) - Thread reel holder
To wind the bobbin thread:
1. Press the Stop button.
 The machine comes to a safe stop.
 The safe stop light lights up.
2. Fit the thread reel on the thread reel holder (1).
3. Insert the thread through the thread guide (2).
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
the guide (6).
bobbin is full.
remove the bobbin.
②
①
(2) - Thread guide
31