Operation
Fig. 14: Threading the needle thread (806N-111) (2)
(3) - Thread lever
(4) - Guide
(5) - Guide
(6) - Guide
(7) - Guide
(8) - Thread tensioning spring
4. Insert the thread from the right to the left through the upper hole of the
5. Insert the thread from the left to the right through the 2nd upper hole
6. Insert the thread from the right to the left through the lower hole of the
7. Guide the thread clockwise once completely around the bolt (12).
8. Feed the thread along next to the bolt (11) on the right.
9. Guide the thread clockwise around the bolt (9).
10. Feed the thread counterclockwise around the tensioner (10).
11. Guide the thread clockwise around the thread tensioning spring (8).
12. Feed the thread under the guide (7).
13. Feed the thread through the thread guide (4) to the thread lever (3).
14. Insert the thread from the right to the left through the thread lever (3).
15. Insert the thread through the guide (4).
16. Insert the thread through the guide (6).
17. Insert the thread through the guide (5).
18. Insert the thread through the needle eye.
19. Pull the thread approx. 5 cm further.
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
③
④
⑤
guide (13).
of the guide (13).
guide (13).
⑥
⑦
⑧
(9) - Bolt
(10) - Tensioner
(11) - Bolt
(12) - Bolt
(13) - Guide
⑬
⑫
⑪
⑩
⑨
29