Operation
Fig. 30: Removing the hose insert (optional)
(1) - Hand valve
To remove the hose insert:
1. Press the hand valve (1) under the tabletop using your right hand and
The hose insert is pushed up on the left side.
2. Raise the hose insert using your left hand before releasing the hand
3. Disconnect the hose insert from the compressed air connection. To do
The compressed air connection is disconnected and the hose insert
Removing the transfer plate
Fig. 31: Removing the transfer plate
(1) - left side of the transfer plate
(2) - right side of the transfer plate
To remove the transfer plate:
1. Loosen the star screw (3).
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
①
hold it there.
valve (1).
this, push the outer ring of the quick coupling to the rear.
can be completely removed.
①
(2) - Hose coupling
(3) - Star screw
②
③
②
45