Fig. 42: Sewing
(1) - Keypad
(2) - Edge folding frame
(3) - Middle slide
(4) - Button 1
To sew with the default settings:
1. Switch on the machine ( p. 23).
The Start button lights up green.
The middle slide is at the rear.
The touchscreen displays user interface 1.
2. Place the basic part onto the sewing material support surface (6) and
3. Press button 1 (4).
The air suction is switched on, the basic part is fixed into place.
The middle slide (3) advances.
4. Place the pocket blank onto the middle slide (3) and align it.
OPTIONAL:
To align the pocket blank:
1. Press button 2 (5).
The middle slide (3) is lowered.
2. Align the material according to the sample.
3. Press button 2 (5).
The middle slide (3) is raised.
56
①
②
③
④
align it.
(5) - Button 2
(6) - Sewing material support surface
(7) - Pedal (not shown)
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
Operation
⑥
⑤