2. Press the numeric buttons to enter the sewing motor speed (100-4000).
The entered value appears in the input field above.
Confirming your entry
To confirm your entry:
1. Press the Confirm button
The input window closes.
The entered value is displayed in the field above the Motor speed
Correcting your entry
To correct your entry:
1. Press the Exit button
The entered value is deleted.
Exiting the selection window:
To exit the selection window:
1. Press the Exit button
The selection window closes, and you are returned to user interface 2.
This setting remains stored after switching off the machine, after loading
a different seam program or after an EMERGENCY STOP.
5.6.11 Attach flap (only 806N-521)
To select the flap attach:
1. Press the Flap attach button
The button is highlighted in green.
In the next sewing cycle the flap is attached.
2. Press the Advance roller button
The button is no longer highlighted in green.
The flat is not attached in the next sewing cycle.
This setting remains stored after switching off the machine, after loading
a different seam program or after an EMERGENCY STOP.
94
button.
to confirm your entry.
to correct the entered value.
again to exit the selection window.
.
again to deactivate this mode.
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
Programming