Assigning Functions To The Favorite Button - Dürkopp Adler 868-M Operating Instructions Manual

Operation
Operating Instructions 868-M - 01.0 - 12/2020

4.14.2 Assigning functions to the favorite button

You can assign one of the button functions to the favorite button.
Select a function that you frequently use so that you can switch it
on faster while sewing.
Fig. 44: Assigning a function to the favorite button
①
(1) - Favorite button
(2) - Screws
The button function is assigned by turning the screw (2) under the
button until it is vertical. Only one function at a time can be assigned
to the favorite button (1). Therefore, only one of the screws (2)
may be in the vertical position (4).
All screws must be turned back to their horizontal initial position (3)
before a new function is assigned.
To assign a function to the favorite button:
1. Turn all screws (2) to their initial position (3) so that the slots
of the screws are horizontal.
2. Turn the screw (2) under the desired button 90° so that the
slot is vertical (4).
+/– +/–
② ③
(3) - Initial position
(4) - Screw vertical
④
67