Table of Contents
Advertisement
Operation
1. Press button 1 (4).
The edge folding process starts.
The sewing material is then fed to the sewing unit, sewn, and depos-
If the transfer of the sewing material to the sewing unit expires, then a new
sewing cycle can commence.
A light signaling the machine's readiness for use is not available. If the ma-
chine is not yet ready, nothing will happen after a press on button 1 (4).
Information
A laser positioning aid for the 806N is available as additional equipment.
It facilitates exact alignment on the sewing material support surface when
the basic part is being applied.
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
ited on the stacker using the outfeed roller.
57
Advertisement
Table of Contents
