Dürkopp Adler 806N-111 Operating Instructions Manual page 94

Fig. 72: Setting the outfeed roller path
2. Enter the roller path to be used for rolling out the finished sewn products
 The entered value appears in the input field above. With a value of 0
Confirming your entry
To confirm your entry:
1. Press the Confirm button
 The input window closes.
 The entered value is displayed in the field above the Outfeed roller
Correcting your entry
To correct your entry:
1. Press the Exit button
 The entered value is deleted.
Exiting the selection window:
To exit the selection window:
1. Press the Exit button
 The selection window closes, and you are returned to user interface 2.
This setting remains stored after switching off the machine, after loading
a different seam program or after an EMERGENCY STOP.
92
by pressing the numeric buttons (0-10).
the button on user interface 2 is not highlighted in green. With values
between 1-10 the button is highlighted in green.
path button.
to confirm your entry.
to correct the entered value.
again to exit the selection window.
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
Programming