Dürkopp Adler 806N-111 Operating Instructions Manual page 118

To remove the transport lock from the sewing head:
1. Loosen the screws (1) on the metal ring (2).
2. Remove the metal ring (2) from the sewing head pressure cylinder.
 The sewing head transport lock has been removed.
 The sewing head can be moved freely.
Removing the transport lock from the edge folding station
Information
The edge folding station is delivered in shape changing mode, even when
no shapes are supplied with the machine.
To remove the transport lock from the edge folding station:
1. Remove the polystyrene foam from between the protective bar and
2. Remove the fastening tape or cable ties from the carriage of the middle
 The edge folding station transport lock has been removed.
Removing the stacker transport lock
To remove the transport lock from the stacker:
1. Remove the fastening tape used for fastening the stacker to the machine.
2. Remove the tape from the stacker.
3. Pivot the stacker away from the machine.
 The stacker transport lock has been removed.
 The stacker can move freely.
Removing the transfer carriage transport lock
To remove the transport lock from the transfer carriage:
1. Removing the fastening tape from the transfer carriage.
 The transfer carriage is connected to the edge folding frame and the
2. Deactivate the EMERGENCY STOP switch by pulling it out to the left
 The transfer carriage transport lock has been removed.
 The transfer carriage can move freely.
116
edge folding frame at the front of the edge folding station.
slide and edge folding frame.
machine frame.
( p. 53).
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
Setup