Operation
Fig. 10: Changing the needle
(1) - Needle
(2) - Groove
To change the needle:
1. Press the Stop button.
The machine comes to a safe stop.
The safe stop light lights up.
2. Loosen the screw (3).
3. Pull the needle (1) downwards out of the needle bar (4).
4. Insert the new needle into the needle bar (4) until it reaches the end
5. Align the groove (2) of the needle to the right.
6. Tighten the screw (3).
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
stop.
④
③
①
(3) - Screw
(4) - Needle bar
③
②
25