Dürkopp Adler 806N-111 Operating Instructions Manual page 113

Setup
To remove the cover on the left side (2):
1. Release the screws on the retaining bar.
2. Pull out the retaining bar.
3. Pull the cover upwards.
4. Remove the cover forwards.
To remove the cover on the right side (9):
1. Release the screws.
2. Remove the plate.
3. Pull the cover upwards.
4. Remove the cover forwards.
To remove the stacker cover (8):
1. Pivot the stacker towards the machine.
2. Loosen the inner earthing cable from the cover.
3. Loosen the hex screw at the outer right of the cover.
4. Loosen the hex screw at the outer left of the cover.
5. Remove the cover forwards.
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
Cover - Right side (9)
Cover - Stacker (8)
111