Programming
5.6.1 Working step-by-step
The machine stops after each working sub-step. This setting is useful for
checking modified machine settings.
Activating Work step-by-step mode
To activate the Work step-by-step mode:
1. Press the Work step-by-step button
.
The button is highlighted in green.
In the next sewing cycle the machine stops after the first working
sub-step.
The button is displayed on user interface 1.
2. Press the Work step-by-step button
again to deactivate this mode.
The button is no longer highlighted in green.
The machine does not stop in the next sewing cycle.
Operating Work step-by-step mode
To operate the Work step-by-step mode:
1. Press Button 1 to move one step forwards.
2. Press Button 2 to move one step backwards.
Each step is executed individually in this manner.
You must deactivate the Work step by step button
on user interface
2 in order to return to a normal sewing cycle.
This setting is deleted after switching off the machine, after loading a dif-
ferent seam program or after an EMERGENCY STOP.
86
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020