Sewing Unit - Dürkopp Adler 806N-111 Operating Instructions Manual

Buttons
The buttons and the pedal are used to operate the machine. A descrip-
tion of the function can be found in the table below in addition to the figure
and designation of the buttons.

3.1.3 Sewing unit

Fig. 5: Sewing unit
(1) - Transfer frame
(2) - Sewing head
The transfer frame (1) of the sewing unit moves to the edge folding station.
The fabric parts are transported from the edge folding station to the sewing
unit by means of the transfer plate (3).
The sewing head (2) lowers, and the fabric parts are sewn together.
18
Button Designation
Button 1
Button 2
Pedal
①
②
③
Button 1 (on the left side):
• starts a sewing cycle
• activates the air suction for the basic
part and pushes the middle slide into
the front position
• navigates stitch by stitch to the correct
point after a needle thread breakage
Button 2 (on the right side):
• lowers the middle slide into the front
position
• raises the middle slide into the front
position
Pedal:
• activates the air suction for the basic
part
• moves the middle slide into the front
position
(3) - Transfer plate
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
Machine description
Function