Table of Contents
Advertisement
Decommissioning
8
A number of activities must be performed if the machine is to be shut down
for a longer period of time or completely decommissioned.
To decommission the machine:
1. Switch off the main switch located centrally under the sewing material
2. Turn the compressed air shut-off valve, at the right next to the main
3. Unplug the power plug.
4. Disconnect the pneumatic connection.
5. Remove residual oil from the oil pan under the sewing material support
6. Cover the operating terminal to protect it from soiling.
7. Cover the control at the edge folding station to protect it from soiling.
8. Cover the entire machine if possible to protect it from soiling and
Observe the necessary safety precautions for transport, ( p. 125).
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
Decommissioning
WARNING
Risk of injury from a lack of care!
A lack of care or a lack of sufficient technical
knowledge when decommissioning the machine
can result in serious injuries.
ONLY clean the machine when it is switched off.
Avoid contact with oil residues.
Allow ONLY trained personnel to disconnect the
machine.
support surface.
switch, to the right in the horizontal position.
surface using a cloth.
damage.
123
Advertisement
Table of Contents
