Activating The Alignment Of Strips - Dürkopp Adler 806N-111 Operating Instructions Manual

5.5.6 Activating the alignment of strips

After folding the pocket blank, the machine pulls the middle slide out of the
pocket and stops. The alignment of the pocket blank can now be checked.
Activating the Strip alignment mode
To activate the Strip alignment mode:
1. Press the Strip alignment button
 The button is highlighted in green.
 In the next sewing cycle, the machine stops after folding. The align-
2. Press the Strip alignment button
 The button is no longer highlighted in green.
 The machine no longer stops after folding in the next sewing cycle.
This setting remains stored after switching off the machine, after loading
a different seam program or after an EMERGENCY STOP.
Operating the Strip alignment mode
To operate the Strip alignment mode:
 The machine stops after folding. The finished folded pocket lies on
1. Check the alignment of the pocket on the basic part.
2. If the alignment is correct: Press button 1.
 The sewing procedure is resumed.
OR
3. If the alignment is not correct: Press the Cancel
 The sewing procedure is canceled. The basic part and pocket must
84
ment of the pocket blank can be checked.
the basic part.
be placed again.
.
again to deactivate this mode.
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
Programming
button.