Table of Contents
Advertisement
4.17 Sewing (806N-521)
Information
Before you can sew, you need to establish the basic settings using the op-
erating software ( p. 74).
The sewing cycle comprises the following steps:
The user only has to carry out the first step. The other steps are run
through by the 806N independently.
To sew with the default settings:
1. Switch on the machine ( p. 23).
The Start button lights up green.
The middle slide is at the rear.
The touchscreen displays user interface 1.
58
• Applying the basic part, the pocket blank and the flap
• Edge folding (folding) the pocket blank
• Transfer of the sewing material
• Sewing the sewing material
• Rolling out and stacking of the sewing material
CAUTION
Risk of injury from sharp and moving objects!
Crushing, cutting and punctures.
NEVER reach into the area of moving parts.
ONLY work on the machine if the safe stop light is
lit up.
NOTICE
Property damage may occur!
Remnants of fabric and thread entering the machine can result in
damage or defects.
Immediately remove any contamination during the sewing process.
Clean the machine daily.
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
Operation
Advertisement
Table of Contents
