Setup
3. Tighten the hex screw at the outer left of the cover.
4. Tighten the hex screw at the outer right of the cover.
5. Attach the earthing cable at the inner right.
6. Pivot the stacker towards the machine.
7.3 Removing the transport locks
Transport locks must be assembled to the following machine parts in order
to protect the machine from damage during transport:
Important
Before you can remove the transport locks, you must take off all covers
first ( p. 108).
Removing the sewing head transport lock
Fig. 84: Removing the sewing head transport lock
(1) - Screws
(2) - Metal ring
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
• Sewing head
• Edge folding station
• Stacker
• Transfer carriage
NOTICE
Property damage may occur!
Incomplete removal of the transport locks can damage or destroy the
machine.
Remove ALL transport locks.
③
②
①
(3) - Pressure cylinder
115