Selecting And Deselecting Stacker Variants - Dürkopp Adler 806N-111 Operating Instructions Manual

To activate the automatic air suction:
1. Press the Automatic air suction button
 The button is highlighted in green.
 The air suction is automatically activated by interruption of the light
2. Press the Automatic air suction
 The button is no longer highlighted in green.
 The air suction is no longer automatically activated, even when a light
This setting remains stored after switching off the machine, after loading
a different seam program or after an EMERGENCY STOP.

5.6.7 Selecting and deselecting stacker variants

The stacker cleanly stores the finished sewn products.
Information
The stackers are switched off by default when the machine is supplied.
Variant 1
In this variant the stack pivots towards the machine when stacking.
To activate stacker variant 1:
1. Press the button Stacker 1
 The button is highlighted in green.
 After the next sewing cycle the machine stores the finished sewn
2. Press the Stacker 1 button
 The button is no longer highlighted in green.
 After the next sewing cycle the machine does not store the finished
This setting remains stored after switching off the machine, after loading
a different seam program or after an EMERGENCY STOP.
90
barrier when the basic part is laid in position.
mode.
barrier is installed.
product using the stacker.
sewn product using the stacker.
.
button again to deactivate this
.
again to deactivate this mode.
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
Programming