Blackmagicdesign ATEM mini Installation And Operation Manual page 34

Below is a description of each view.
Preview
The preview view lets you monitor the source currently switched to the preview output. This view
is helpful to practice switching between sources, previewing transitions or setting up a keyer so
you can see what it will look like before switching to the program output. You need to change the
switcher operation to program/preview style switching to make use of the preview view. There is
more information about this in later sections of this manual.
Program View
The program view displays what is currently switched to the program output. This view will always
show exactly what you are broadcasting.
Input Views
The input views display all the sources connected to the HDMI inputs. Having all inputs on the
multiview lets you see the image from every camera so you can make quick decisions. However
they don't always have to be cameras as you could also have a computer's video output or a
HyperDeck disk recorder connected to the switcher's inputs and you can monitor them in the
input views.
When an input is switched to the preview or program output, a green or red tally border will appear
around the input's respective view. Green represents the preview output and red represents the
program output, or 'on air'.
Media Player View
This view displays the graphic currently loaded in the media player. To load a graphic, simply go
to the media pool in ATEM Software Control and drag a still into the media player. You can read
more about how to use the media player and the media pool in the section 'using ATEM Software
Control/'using the media page'.
Using the Multiview 34