Blackmagicdesign ATEM mini Installation And Operation Manual page 123

Hue
Saturation
Luminance
Style
Outer Width
Inner Width
Outer Soften
Inner Soften
Border/Shadow
Opacity
Bevel Position
Bevel Soften
DVE shadow light source parameters
Enable Shadow
Angle
Altitude
Setting up a DVE Key on the Upstream Keyer using
ATEM 1 M/E Advanced Panel
1 Press the KEY 1 next transition button to enable the keyer on the preview output.
2 In the keyers LCD menu, select the DVE key type using the corresponding soft
control knob.
3 Select the fill source using the corresponding control knob or via the a source
button on the source select bus.
4 Press the system control left and right arrow buttons to navigate through the
DVE parameters, and use the soft control knobs to adjust settings, such as
rotation, position, size, mask settings, light source, border, and key frames
for movement.
Changes the border color. The hue value is a location on the
color wheel.
Changes the intensity of the border color.
Change the brightness of the border color.
Sets the bevel style for the DVE border.
Adjusts the outside width of the border.
Adjusts the inside width of the border.
Outside softness adjusts the outside edge of the border, the edge that
touches the background video.
Adjusts inside softness. This softness parameter adjusts the inside edge
of the border, the edge that touches the video.
Opacity adjusts the transparency of the border and shadow, use this
setting to create interesting colored glass borders.
Adjusts the position of the 3D bevel on the border.
Bevel softness adjusts the overall softness of the 3D border. A high
value for this parameter will result in a rounded or beveled border.
Enables or disables the drop shadow.
Adjusts the direction of the light source on the DVE or picture in picture.
Both the border and drop shadow, if available, are affected by changes to
this setting.
Adjusts the distance of the light source from the DVE or picture in picture.
Both the border and drop shadow, if available, are affected by changes to
this setting.
Keying using ATEM Mini 123