Blackmagicdesign ATEM mini Installation And Operation Manual page 172

Scene Files
The numbered buttons along the top of each CCU let you quickly store and recall up to 5 scene
file presets. For example, once you have arranged all your settings for a camera and you are set
up for broadcast, you can then save all the parameters for each camera and recall them later.
It's a very fast process!
To store a scene file:
1 Press the 'store' button on a CCU. The button will illuminate red to indicate the panel is
ready to store a file.
2 Press a numbered scene file button.
The scene file indicator and buttons will illuminate, indicating when a scene file is stored
or recalled.
To recall a scene file:
Press the numbered button for the scene file you want to recall.
That's all you need to do!
The scene file buttons are
used for storing and recalling
all settings for CCU controls
Recall All
When this feature is enabled, you can recall a stored scene file on all cameras simultaneously
when you press the corresponding scene file button on a single CCU.
For example, you may have a specific setup for each camera that is optimized for a set in your
live production. This will likely be a large number of settings that you will want to recall later
when you return to that set.
The following is an example of how you can recall complex settings for multiple cameras
simultaneously.
To recall a scene file to multiple cameras:
1 Once all your cameras are set up, store a scene file for each camera on scene file 1.
2 Enable the 'recall all' setting by pressing the corresponding soft button in the LCD
home menu.
3 Now make any changes you want to each camera.
4 Press the scene file 1 button on any CCU. You will notice that all CCUs have recalled the
settings stored in scene file 1 for each independent CCU.
Using ATEM Camera Control Panel 172