Controlling Cameras - Blackmagicdesign ATEM mini Installation And Operation Manual

Other buttons and knobs in this section of the CCU are for adjusting the sensitivity of the
joystick control, setting the coarse level, locking and unlocking the CCU and more. Details on
all the features are provided in the following section.

Controlling Cameras

This section describes all the features on each CCU and a general overview on how to
approach camera control.
The first step to controlling cameras is to assign a camera for a CCU.
Assigning a Camera to a CCU
At the bottom of the LCD home screen for each CCU, you will see its camera number displayed
and a soft control knob underneath it. Simply turn the knob to change the camera number.
You will also see the camera name change on the LCD. The camera name will illuminate red
when on air.
SETTINGS BANK A
CAMERA CONTROL
Camera 1
1
CAMERA
TIP The large camera number next to the CCU's joystick control will also change
when you assign a camera. This large identifying number is easy to see and will
illuminate red when its camera is live on the program output.
RECALL ALL
The camera name and number
on the LCD home screen
shows the camera currently
selected for each CCU
Using ATEM Camera Control Panel 171