Connecting To Skype Or Zoom; Setting The Webcam Source - Blackmagicdesign ATEM mini Installation And Operation Manual

Connecting to Skype or Zoom

Plug ATEM Mini's webcam output into your computer's USB input. Your computer will recognize
ATEM Mini as a webcam and you can select it as the webcam source in your streaming
program, such as Skype, Zoom or OBS Studio.
Plug your computer into ATEM Mini's webcam out USB-C connector

Setting the Webcam Source

In most cases, your streaming software will automatically set ATEM Mini as the webcam, so
when you launch your streaming software you will see the picture from your ATEM Mini straight
away. If your software doesn't select ATEM Mini, simply set the software to use ATEM Mini as
the webcam and microphone.
Setting the Webcam on Skype
1
Click on the profile picture and select 'settings'.
3
Click on the 'camera' menu and select
Blackmagic Design from the list. You will see
the video from ATEM Mini appear in the preview
window.
2
Select 'audio & video' from the sidebar
4
Now go to the 'microphone' menu and select
Blackmagic Design as your audio source.
Getting Started 10