Smartphone Tethering - Blackmagicdesign ATEM mini Installation And Operation Manual

Direct Streaming by Sharing Your Computer Internet
With ATEM Software Control now connected to your switcher, you can set up a direct stream via
your computer's internet connection.
To set up your ATEM Mini Pro or ATEM Mini Extreme for software control and direct streaming:
1 Plug your ATEM into your computer's spare Ethernet port. It may take a moment for
DHCP to find the unit and assign an IP address.
2 Launch ATEM Software Control.
3 You will see ATEM Mini Pro or ATEM Mini Extreme listed as a connected ATEM switcher
on your network. Simply select your switcher from the list.
4 Click 'connect'.
5 Configure your computer to share its internet connection through its Ethernet port.
Mac: in System Preferences, click 'sharing' then select 'internet sharing' from the
'service' list. In the 'share your connection from' menu, choose 'wi-fi' if your Mac is
connected to the internet over wifi. In the 'to computers using' list, select 'ethernet'. In
the 'service' list, tick the 'internet sharing' checkbox. When you are asked if you are
sure you want to turn on internet sharing, click 'start'.
Windows: in the Windows search box, type 'view network connections' and press enter.
Right click on the internet connection and select 'properties'. On the 'sharing' tab, tick
'allow other network users to connect through this computer's internet connection'.
Select a network connection in the menu then click 'OK'.
ATEM Software Control will now appear with buttons and indicators illuminated. You can now
operate your switcher the same way you would via USB-C. Your ATEM switcher is now setup for
direct streaming via your computer.

Smartphone Tethering

Once you have set up your ATEM Mini Pro or ATEM Mini Pro ISO model switcher to stream to
YouTube, Twitch or other platforms, you can now direct stream using your smartphone. This
means you can set up fast and be streaming to the world in any location where your
smartphone has a 4G or 5G cellular connection or is capable of reverse tethering your WiFi
connection.
1 Simply connect a cable from your smartphone to the USB-C port on your
ATEM Mini Pro.
2 Once connected, make sure your smartphone device has hotspot activated.
On your iOS device open settings> personal hotspot and make sure 'allow others to join'
option is on.
For Android devices, swipe the screen to display the quick menu. Press and hold the hotspot
icon and then turn on USB tethering.
Now you can press the On Air button on your ATEM Mini Pro switcher to go live!
Additional Features on ATEM Mini Pro and ATEM Mini Extreme 26