Remote Atem Mini Pro - Blackmagicdesign ATEM mini Installation And Operation Manual

Remote ATEM Mini Pro

Now you have this settings file and have emailed it to the person using the remote ATEM Mini
Pro, there is a few things they need to do. These steps are quite simple, so it should be very
easy for the remote ATEM Mini Pro studio to get these settings loaded.
All the remote studio needs to do is go to the ATEM Software Control and select load streaming
settings in the stream menu at the top of their screen.
Once loaded, a new service will be added to the platform menu in the streaming settings.
They just need to select this menu and press on air to start streaming.
Select the ATEM Streaming Bridge from the platform
menu in ATEM Software Control's live stream palette
When the ATEM Streaming Bridge has been selected in ATEM Software Control's
live stream palette, press the On Air button on the remote ATEM Mini Pro
Creating Video Links with ATEM Streaming Bridge 134