4286A with Chip Handler
This chapter describes the functions available with the 4286A and operation procedures for
each of those functions when the 4286A is used with a chip handler.
Dierentiation of DUTs through BIN Sorting
GO/NO-GO Test with Limit Test Function
Contact Check
Enabling Beeper
Display Updating ON/OFF
Setup Linking 4286A and Chip Handler
Setting up Handler Interface Board
This chapter also includes the technical information for using 4286A with automatic selection
system in the production line.
4286A Measurement Time
Electrical Specication of Handler Interface
Performing Calibration with Working Standard
Restoring Settings After Power Interruption
Note
When you use the 4286A together with a chip handler, be sure to set up the
interface board before performing limit test or BIN sorting. See \Setting up
Handler Interface Board" for details.
4286A with Chip Handler
4
4-1