Programming Examples Using HP VEE
Programming Basics
Basic Objects to Control the Instrument
You can create programs using HP VEE and the VXIplug&play driver, as shown in
the following steps. In this procedure you use only three objects; To/From, Data, and
Display, shown in Figure 3-2.
1. Display the To/From object for the VXIplug&play driver.
2. Define the transactions (functions of the driver) in the To/From object.
3. Set the input parameters for the transaction.
4. (Optional: Use a variable for the input parameter.)
5. Repeat steps 2, 3, and 4 to complete the To/From object.
6. Connect the input terminals of the To/From object to the Data object.
7. Connect the output terminals of the To/From object to the Display object.
8. Complete the HP VEE program.
Figure 3-2
Basic Objects of HP VEE
3-6
Agilent 4155B/4156B VXIplug&play Driver User's Guide, Edition 4