Hmi Service Center; General Information; Order Data - B&R PC 3100 User Manual

7.10 HMI Service Center

7.10.1 General information

The HMI Service Center is software for testing B&R industrial PCs and Automation Panels. Testing covers different
categories such as COM, network and SRAM.
The test system consists of a USB flash drive with installed Windows PE operating system and the HMI Service
Center.
For details about the HMI Service Center, see the HMI Service Center user's manual. This can be downloaded at
no cost from the B&R website (www.br-automation.com).

7.10.2 Order data

Order number Short description
Accessories
5SWUTI.0001-000 HMI Service Center USB flash drive - Hardware diagnostic soft-
ware - For APC910/PPC900 - For PPC1200 - For APC2100/
PPC2100 - For APC2200/PPC2200 - For APC3100/PPC3100 -
For APC mobile - For AP800/AP900 - For AP9x3/AP9xD - For
AP1000/AP5000
The following limitations regarding supported hardware revisions must be observed:
Devices
Automation Panel 1000
Automation Panel 5000
Automation PC 3100
Automation PC 3100 mobile
Automation PC 2200
Automation PC 810
Automation PC 511
Automation PC 510
Panel PC 3100
Panel PC 2200
Panel PC 1200
Panel PC 800
Power Panel 500
Panel PC 3100 panel mount device User's manual V 2.10
Starting Up to E0 Starting
with D0 with E0
●
●
●
●
●
●
●
●
●
●
●
●
●
Software
Figure
299