Alternate Exit Of Cab; Electromagnetic Interference - Komatsu WA600-8 Operation & Maintenance Manual

SAFETY
Whenever leaving the machine, be sure to lower the work
equipment to the ground, lock the work equipment by pressing
the work equipment lock switch (1) (the pilot lamp lights up).
Set the steering lock lever (2) to LOCK position (L), and park-
ing brake switch (3) to ON (operate) position (A), and stop the
engine. In addition, lock all places and always take the key with
you and keep it in the specified location.

ALTERNATE EXIT OF CAB

The machine with a cab has an exit for normal use on the left side, and an alternate exit on the right side. Use
the alternate exit on the right side if the exit for normal use on the left side is unavailable.

ELECTROMAGNETIC INTERFERENCE

When the machine is operating close to a source of high electromagnetic interference, such as a radar station,
some abnormal phenomena may be observed.
• The display on the monitor panel may behave erratically.
• The warning buzzer may sound.
These effects do not signify a malfunction and the machine will return to normal as soon as the source of inter-
ference is removed.
GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTE-
NANCE
2-21