Method For Removing Bucket - Komatsu WA600-8 Operation & Maintenance Manual

OPERATION
3.
Pull cab door knob (2).
By pulling knob (2) of the cab door, it opens to OPEN posi-
tion of stopper (4) by gas spring (3).
REMARK
To open the cab door from inside, pull the cab door open
knob.
METHOD FOR LOCKING OPERATOR CAB DOOR
1.
Close the cab door.
2.
Insert the starting switch key into key slot (1).
3.
Turn the starting switch key to "LOCK" position (B), and
then remove the starting switch key.
Position (A)
OPEN
Position (B)
LOCK

METHOD FOR REMOVING BUCKET

• When pins are knocked in with a hammer, pieces of metal may fly and cause serious injury.
When performing this operation, always wear protective eyeglasses, helmet, gloves, and other pro-
tective equipment.
• Place the removed bucket in a stable condition.
• The pin is hit with a strong force to remove, so the pin may fly out and injure people around the
machine. Make sure that there is no one around the machine before starting the work.
• When removing the pins, do not stand behind the bucket. In addition, be extremely careful not to
put your foot on the side of the bucket.
• When removing or inserting pins, be extremely careful not to get your fingers caught.
• Never insert your fingers into the pin holes when aligning the holes.
MACHINE OPERATIONS AND CONTROLS
k k
WARNING
3-251