Komatsu WA600-8 Operation & Maintenance Manual page 339

OPERATION
PRESET BUTTON
If you register desired stations to the preset button beforehand, you can select each station by touching this but-
ton once.
It is possible to preset 6 stations each for both AM and FM.
For the presetting method, see "METHOD FOR CONTROLLING RADIO (3-272)".
DISPLAY SELECTOR BUTTON
Use the display selector button to change frequency and clock shown on the display.
Each time you press this button, frequency, clock and band are shown on the display in this order.
If 1.5 seconds passes while a band is shown, a frequency will be displayed.
As long as AUX is selected, this button alternately switches the display between AUX and the clock.
SOUND CONTROL BUTTON
Press the sound control button, and the sound adjustment is ready.
Each time this button is pressed, BAL (Balance), TRE (Treble) and BAS (Bass) will be selected in this order.
If this button is pressed while BAS is displayed, the sound adjustment will be canceled.
For the sound adjusting method, see "METHOD FOR CONTROLLING RADIO (3-272)".
DISPLAY
(A): Band name, "AUX", frequency, clock and other character/
numeric information are displayed.
(B): Frequencies are displayed at steps of 50 kHz in certain
areas.
(C): Lights up when a stereo broadcasting is heard while a FM
station is selected.
(D): Lights up at the time of balance adjustment in the sound
adjusting condition.
(E): Lights up at the time of treble adjustment in the sound ad-
justing condition.
(F): Lights up at the time of bass adjustment in the sound adjusting condition.
AUX
NOTICE
• A stereo miniature plug can be connected.
• As a power source, use the battery attached to the equipment to connect.
If you use an electric power supply installed to the machine, the noise may occur.
• The noise may occur if you pull out the input plug when AUX is selected, or if you push in or pull
out the plugs of the equipment to connect.
You can hear the sound through the speaker of the machine when you connect a commercially available porta-
ble audio equipment to the machine.
1.
Open cap (a).
2.
Connect a portable audio equipment by using an commer-
cially available audio cable.
HANDLE RADIO
3-271